FILM ADHESIVES

Product Description Applications Form Matrix color Nominal Cure Temp,°F (°C) Max. Dry Operating Temp, °F (°C) Comments
AX-2114 High Performance Toughened Epoxy Film Adhesive High performance / high peel bonding applications for metallic and composite substrates Adhesive film, supported Off-white 250°F (121°C) 200°F (93°C) Also available unsupported. Color variations available.
AX-2115 Enhanced Peel, High Performance Toughened Epoxy Film Adhesive High performance / high peel bonding applications for metallic, composite, and thermoplastic substrates Adhesive film, supported Red 250°F (121°C) 200°F (93°C) Also available unsupported. Color variations available.
AX-2121 Variable Temp. Cure Epoxy Film Adhesive Low temperature curing / prototype development / snap curing Adhesive film, supported Cream 160°F (71°C) 250°F (121°C) Various colors available. Also available unsupported.
AX-2130 High Temperature, Toughened Epoxy Film Adhesive High temperature metal / metal or composite bonding, honeycomb bonding Adhesive film, supported Blue 325°F (163°C) 350°F (177°C) Also available unsupported. Color variations available.
AX-2140 Epoxy Surfacing & Finishing Film Adhesive Surface finishing of composite parts. Co-cure with prepreg to reduce pitting and smooth part surfaces. Eliminates fill, fair, and repair Adhesive film, supported Grey 250°F (121°C) or 350°F (177°C) 250°F (121°C) Color variations available. May be consolidated with lightning strike materials. Low temperature cure available.
AX-2150 Modified Thermosetting Film Adhesive Low weight / medium load bonding applications. Honeycomb peel strength improvement Lightweight adhesive film, unsupported Yellow 250°F (121°C) or 350°F (177°C) 250°F (121°C) Heavier weights and supported versions available.
AX-2151 PVB Phenolic Ballistic Film Adhesive Bonding promotion and high energy load transfer between fabrics for ballistic applications Adhesive film, unsupported Green 250°F (121°C) 200°F (93°C) Typically used in aramid ballistic laminates.
AX-2180 Epoxy Surfacing & Finishing Film Adhesive Low FST/OSU Surface finishing of composite parts for aircraft interiors. Co-cure with prepreg to reduce pitting and smooth part surfaces. Eliminates fill, fair, and repair Adhesive film, supported Off-white 250°F (121°C) 250°F (121°C) Color variations available. Snap cure grades available. Meets FST/OSU.
AX-2190 Foaming Epoxy Core Splice Adhesive Core splicing and edge-bonding of honeycomb cores and paneling Medium weight adhesive film, small sheets Light orange 250°F (121°C) or 350°F (177°C) 300°F (149°C) Available in a variety of widths, weights, colors and thicknesses. Flame retardant versions are available.

(949) 623-4400

Contact Axiom Materials Request Information

Products

Ceramic Matrix Composites

CMC prepregs are used for parts requiring thermal performance up to 2200°F

Prepreg material

Axiom Materials specially formulated resin systems include epoxy, phenolic, polyester, cyanate ester, vinyl ester and polyimide.

Film Adhesives

Metal and composite bonding adhesives, surfacing and lightning strike films, and other bonding solutions.

Ancillary Products

A variety of primers, adhesives, panel fillers and sealing resins are available.

Research and
Development

We specialize in custom solutions for our customers; working closely with you to develop the correct solutions for each project’s needs and specifications.

In addition to conventional resin systems, we provide cutting-edge custom resin formulations to meet your specific performance requirements.

For further information and to request a Product Technical Data Sheet (TDS) or Safety Data Sheet (SDS), contact info@axiommaterials.com

News & events

CAMX 2019

Visit our Booth at the Anaheim Convention Center (Anaheim, CA) for the CAMX EXP. (Conference: September 23-26, 2019; Exhibition: September 24-26, 2019)

For more info: https://www.thecamx.org/

NSMMS & CRASTE 2019

We will be attending the NSMMS & CRASTE 2019 Joint Symposium at Green Valley Ranch in Henderson, NV. (June 24-27, 2019)

For more info: https://usasymposium.com/space/2019/default.php

Sampe 2019

Visit our Booth at the Charlotte Convention Center for the Sampe Conference & Exhibition (Conference: May 20-23, 2019; Exhibition: May 21-22, 2019)

For more info: https://www.sampeamerica.org/

Ceramics Expo 2019

Visit our Booth at the IX Center (Cleveland, Ohio) for the Ceramics Expo. (Conference and Exhibition: April 30-May 1, 2019)

For more info: http://www.ceramicsexpousa.com/

NIAR Testing of Axiom Materials’ Oxide Oxide CMC Prepreg

Axiom Materials is pleased to announce a cooperative program with Wichita State University’s National Institute of Aviation Research (NIAR) for the development of test techniques and data on our Oxide-Oxide ceramic matrix composite (CMC) prepreg ...

More

CAMX Dallas 2018

Visit our Booth at the Kay Bailey Hutchison Convention Center for the Composites and Advanced Materials Expo. (Conference: Oct 15-18; Exhibition: Oct 16-18)

For more info: www.thecamx.org